| 1. | Three key coupling factors , longitudinal 、 transverse and angular misalignments between two optical fibers are analyzed
对两根光纤的纵向距离、横向偏移和角度倾斜三个耦合效率的影响因子进行了仿真分析。 |
| 2. | The conclusion is shown that the effects of transverse and angular misalignments on the splice loss are more significant than longitudinal misalignment
得到的结论是：纵向距离对耦合效率的影响不大，横向偏移和角度偏移对耦合效率的影响较大。 |
| 3. | Fibre optic interconnecting devices and passive components - basic test and measurement procedures - examinations and measurements - measurement of the angular misalignment between fibre and ferrule axes
光纤互连器件和无源元件.基本试验和测量程序.检验和测量.光纤和金属加固环轴线间角度误差的测量 |
| 4. | Fibre optic interconnecting devices and passive components - basic test and measurement procedures - part 3 - 26 : examinations and measurements ; measurement of the angular misalignment between fibre and ferrule axes
光纤互连设备和无源元件.基本试验和测量程序.第3 - 26部分:检验和测量.光纤和金属加固环轴线间角度误差的测量 |
| 5. | Fibre optic interconnecting devices and passive components - basic test and measurement procedures - part 3 - 26 : examinations and measurements - measurement of the angular misalignment between fibre and ferrules axes
光纤互连装置和无源元件.基本试验和测量程序.第3 - 26部分:检验和测量.光纤与金属加固环轴线间角度偏离的测量 |
| 6. | We tested and analyzed the translation and angular misalignment sensitivity of the collimators for the switch assembly . the characteristics of switching speed was compared with that of a numerical solution by using finite element analysis ( fea ) and a good agreement was obtained
然后通过有限元分析软件ansys对微驱动单元进行了电磁场分析，并对光开关的开关时间进行了计算，计算结果与实际测量结果相近，此开关实测速度小于2ms 。 |
